JHS 3 Series Phaser Pedal

The JHS 3 Series Phaser is a versatile, easy-to-use six-stage phaser inspired by classic phaser circuits from the 1970s. It covers the familiar sweeping phase sounds associated with that era while adding a unique Blend control and Feedback toggle for a wider range of modern and experimental textures.

The circuit draws inspiration from several classic phasers, including the Top Gear Phaser, Guyatone PS-007 Phaser, Electro-Harmonix Small Stone, and MXR M107 Phase 100. Rather than recreating one particular vintage pedal, the 3 Series Phaser combines those influences with additional control over the depth, speed, and intensity of the effect.

Blend mixes the wet and dry signals from fully dry to fully wet. Turning Blend all the way clockwise removes the dry signal entirely and can create an almost vibrato-like effect. Rate controls the speed of the LFO, moving from slower sweeps counterclockwise to faster modulation clockwise.

Width controls the width of the LFO. Lower settings keep the modulation more mild and focused, while higher settings produce a broader and more extreme phase sweep. The Feedback toggle adds resonance by feeding the output of the phaser back into its input, emphasizing selected frequencies and producing a more intense phase effect.

Like the rest of the JHS 3 Series, the Phaser uses three simple controls and one toggle to provide a broad range of sounds without unnecessary complexity. Each 3 Series pedal is made by JHS in Kansas City, Missouri using high-quality parts with careful quality control and attention to detail.

Features:

• Versatile six-stage phaser
• Inspired by classic 1970s phaser circuits
• Influenced by the Top Gear Phaser, Guyatone PS-007, Electro-Harmonix Small Stone, and MXR M107 Phase 100
• Traditional vintage-style phase sounds plus modern and experimental textures
• Blend control mixes dry and wet signals
• Fully wet Blend setting can produce an almost vibrato-like effect
• Rate control adjusts LFO speed
• Width control adjusts the range of the LFO sweep
• Feedback toggle adds resonance and increases phase intensity
• Simple three-knob, one-toggle 3 Series layout
• Made by JHS Pedals in Kansas City, Missouri

Controls:

• Blend: Mixes the dry and phased signals; fully counterclockwise is dry and fully clockwise is wet
• Rate: Controls the speed of the LFO
• Width: Controls the width of the LFO sweep
• Feedback: Adds resonance by feeding the output back into the input for a more intense phase effect

Specifications:

• Effect Type: Six-Stage Phaser
• Controls: Blend, Rate, Width
• Additional Control: Feedback Toggle
• Input: 1/4"
• Output: 1/4"
• Power Requirements: 9V DC, center-negative
• Current Draw: 70mA
• Maximum Supply Voltage: 9V DC
• Dimensions: 4.42" L × 2.38" W × 1.22" H
• Country of Manufacture: USA