Fairfield Circuitry Shallow Water K-Field LoFi Modulator Pedal

SPECIFICATIONS
Controls

• Rate: The RATE control adjusts the time intervals at which the random pitch fluctuations occur.
• Damp: The DAMP control affects the slope of the modulating signal
• Depth: The DEPTH knob adjusts the intensity of the modulation
• LPG: The LPG control adjusts the level of the envelope going to the low pass filter and gate circuit.
• Mix: The MIX control balances between the dry and wet signal. When it’s full wet (clockwise) the effect is like a vibrato. Chorus-type sounds are achieved by adding some of the dry signal (counterclockwise).
• Volume: The VOLUME knob controls the output volume.

• Boost And Pad: There are 2 jumpers at the input stage to match your input signal’s level and impedance, BOOST and PAD
• LPG Adjust: The recovery filter’s lowest frequency can be adjusted to fine-tune the way it will react to incoming signals. Lowering this frequency emphasizes the action of the low pass filter, effectively raising the threshold of sensitivity.

• 1/4” mono input/output jacks
• 2.1mm DC connector
• 4.7” x 3.8” enclosure dimensions
• Technical Features
• True bypass
• Input impedance 1MΩ
• Output impedance 2kΩ
• Power supply 9 to 9.6 VDC
• Current draw 40 mA max